Application Guide

New Concrete Surface

Plaster must be completely dry (Approx 2 weeks are required for proper drying in normal climatic condition). Apply one coat Rainbow Weatherguard Superflex Primer followed by 3 – 4 coats of Weatherguard Superflex Paint.

Old Painted Surfaces

Remove all dust, dirt, oil, grease, mould, stain, loose and flaking paint before painting by scraping. Apply at least one coat of Rainbow Weatherguard Superflex Primer followed by 3 – 4 coats of Weatherguard Superflex Paints.Slight over thinning this will help primer to penetrate into the surface apply second coat of primer after filling so surface is properly prepared.

Wood

Remove all oil, grease, wax polish and loose paint by scrapping. Fill gaps, seal knots and allow to dry. If necessary, wash with detergent and water followed by proper rinsing with fresh water and allow to dry.

Metal Surfaces

Remove oil, grease, rust with detergent & water solution use waterproof emery paper if necessary. Allow to dry before applying Elastomeric Paint.

Note: The above Information is given in good faith, but without any Warranty.