Application Guide
New Concrete Surface
New plaster must be completely clean, dry and free from dirt and grease. Sand down the plaster with Emery stone or emery paper and apply one coat of Rainbow Water Based Primer. Prepare the surface by applying 2 coats of Rainbow Wall Putty. Then use Rainbow Water Based Primer as a base coat followed by 2 coats of Rainbow Fluorescent Paint. Use a white base coat to achieve the most dramatic color effects.
Old Painted Surfaces
Remove all dust, dirt and loose adhering or flaked paints by scarping with scraper (wall) or Emery Paper (for wooden surface). After scarping apply one coat of Rainbow Water Based Primer. Then apply second coat of Sealer which is followed by the Filling. After the putty is completely dry, sand down the surface. Then use Rainbow Water Based Primer as a base coat followed by 2 coats of Rainbow Fluorescent Paint.
Note: The above Information is given in good faith, but without any Warranty.
combination with other Rainbow fluorescent paint colours to make the colors more vibrant. It is available in 5 eye-catching brighter than normal colours which "glow" under ultraviolet light. It is suitable for use on most surfaces after the surface has been properly prepared.
English