Application Guide
New Concrete Surface
New plaster must be completely clean, dry and free from dirt and grease. Sand down the plaster with Emery stone or emery paper and apply 1-2 coats of Rainbow Water Based Primer. After surface preparation apply by 1-2 coats of Rainbow Desert-Sand Finish Paint.
Old Painted Surface
Remove all dust, dirt and loose adhering or flaked paints by scarping with scraper (wall) or Emery Paper (for wooden surface). After scarping apply 1-2 coats of Rainbow Water Based Primer.
For very old and powdery surface preferable to use Rainbow Wall Sealer Primer, followed by one coat of Water Based Primer. After surface preparation apply 1-2 coats of Rainbow Desert-Sand Finish Paint.
KEY POINTS ABOUT APPLICATION:
– Let plaster cure at least 21 days before painting.
– Remove any loose & flaking paint back to a sound substrate and a firm edge by scraping & sanding.
Note: The above Information is given in good faith, but without any Warranty.
to exterior walls. It not only provides a uniform textured appearance to rough and irregular surfaces with superior exterior protection but its sand-like effect gives a truly timeless, classy and elegant finish. Its toughness, weather resistance, long lasting colours along with its sophisticated finish make it ideal for both interior and exterior use.
English