Application Guide
Surface Preparation
New plaster must be completely clean, dry and free from dirt and grease. Growths of fungus, algae or mass should be removed by wire brushing and water. In case of area having excessive dampness use Rainbow Acrylic water based Primer to block further dampness. For filling cracks upto 3mm use Rainbow Superflex Wall Putty to seal cracks.
Steps to Be Followed
Rainbow Mirage Marble Finish Paint can be applied over prepared substrate with trowel/ scrapper.
1. Apply the first coat of Rainbow Mirage Marble Finish in such a way so that the surface is perfectly smooth. Allow it to dry for 20-30 Mins.
2. Apply a very fine layer of the product. Allow 50 mins to dry. (2nd coat)
3. Apply a thin layer of the paint randomly in different directions. (3rd coat)
4. Smoothen the surface with the edge of the trowel/scrapper blade.
If necessary repeat step#2 for additional coat.
This product has been specially formulated such that it is easy to apply, allow the tool to move smoothly without much effort, retaining the pattern left by the tool. Depending on the amount and time of buffing it is possible to obtain eggshell to glossy finish.
KEY POINTS ABOUT APPLICATION:
– Let plaster cure at least 21 days before painting.
– Remove any loose & flaking paint back to a sound substrate and a firm edge by scraping & sanding.
Note: The above Information is given in good faith, but without any Warranty.
applied by trowel and scrapper in thin layers.After drying, scrub with scrapper blade to create polished, two-tone appearance of marble surface. This paint has distinctive marble, granite and wallpaper effect that turns ordinary walls into extraordinary and luxurious work of art, with non yellowing properties.
English