Application Guide
New Concrete Surface
New plaster must be completely clean, dry and free from dirt and grease. Sand down the plaster with Emery stone or emery paper and apply one coat of Rainbow Water Based Primer. Prepare the surface by applying 2 coats of Rainbow Wall Putty. Then use Rainbow Water Based Primer as a base coat followed by 1-2 coats of Rainbow Passion Special Effect Paint. Use a white base coat to achieve the most dramatic colour effects.
Old Painted Surfaces
Remove all dust, dirt and loose adhering or flaked paints by scarping with scraper (wall) or Emery Paper (for wooden surface). After scarping apply one coat of Rainbow Water Based Primer. Then apply second coat of Sealer which is followed by the Filling. For very old and powdery surface preferable to use Rainbow Wall Sealer Primer, followed by one coat of water based Primer. After the putty is completely dry, sand down the surface. After putty please use Rainbow Water Based Primer as a base coat followed by 1-2 coats of Rainbow Passion Special Effect Paint.
Note: The above Information is given in good faith, but without any Warranty.
finish. It is formulated to be used on all kind of masonry, concrete, wooden and gypsum surfaces. The product is a water-based product and can be diluteable by water to produce eye-catching decorative metallic effects. The product is highly washable and retains its original colour without blackening.
