Application Guide
New Surface
Rainbow Superflex Exterior Wall Putty is ready for use however slight addition of water is recommended for excessive absorbent plasters. Sand down the plaster with emery paper preferably emery stone, apply one coat of Superflex Exterior Primer followed by 2 coats of Rainbow Superflex Exterior Putty. Two coats of putty is applied, with a interval of 2-3 hours between coats.
Old Surfaces
Remove dust, dirt and loose adhering or flaked paints by scarping with scraper (wall) or Emery Paper. Dust off and apply 1 coat of Superflex Exterior Primer. Allow to dry properly followed by 1-2 coats of Rainbow Superflex Exterior Putty. Prior to application of finish paint.
Note: The above Information is given in good faith, but without any Warranty.
able to bridge a wide variety of cracks while offering fast drying and good sanding properties. It helps in filling cracks and also obliterates the grey color of plaster improving hiding power of finish paint while it also provides better adhesion to surface.
